Drone hybrid generator Power System for aerial photography planting and mapping UAV long flight time endurance
Drone hybrid generator FL6000 is a high efficiency generator designed for multicopters. FL6000 generator is only 7.2kg , which is much lighter than any other generators that produce 5300w output power, so FL6000 generator is five times the efficiency of other generators. The continuous power output of generator is 5300w. An internal combustion engine consumes gasoline and spins a generator to ensure a 44.4V output. Besides this, a 12S lipo battery package is also needed to be installed on board to offer emergency back-up power for quick climbing and quick maneuvering. With this generator, the max take-off weight can reach 48kg(according to your power system), and the max flight time is about 2 hours. FL6000 generator is suitable for those multicopters whose power is still lower than 5300w even with 7.2kg generator system(including generator, fuel tank and 3L gasoline). As for the fuel, the auto gasoline is available. When the generator running, its noise level is about 80 dBA. But the noise has no effect if you talk 10 meters away from the drone.
Also maintenance is necessary for FL6000 to keep its high performance. The maintenance cycle is 50 hours. And we will also provide the accessories for generator maintenance.
المواصفات
Size: 295*290*230mm (LxWxH)
Rated voltage :MIX 44.4V MAX 50V 12S
Continues power: 5300W
Weight: 7.2 kg
Fuel tank capacity: 3.5L / 2L
Fuel consumption : 6L/H
Suggest rotor: EA118 KV95 & 38 inch propeller for Quadrotor
Max takeoff weight: 39KGS for industrial drone.
نسبة الوقود: 25:1 (بنزين 95#، زيت FD درجة 2T)
درجة حرارة العمل: -20 ~ 45 درجة مئوية
وضع بدء التشغيل: تشغيل ذاتي التشغيل بزر واحد
Cooling method: forced air cooling
FL6000 advantages:
1: نظام التبريد الذكي: يمكنه تقليل استهلاك الحرارة وفقًا لدرجة الحرارة العالية والمنخفضة لأسطوانة المحرك.
2: شاشة LED ذكية، عرض دقيق في الوقت الحقيقي للسرعة والجهد ودرجة حرارة الأسطوانة وحالة النظام.
3: تصميم صناعي من قطعة واحدة حاصل على براءة اختراع، مقاوم للغبار ومقاوم للماء وسهل الصيانة.
الميزات
يتم بدء تشغيل تصميم توليد الطاقة المتكامل، ويمكن تحقيق وظيفة بدء تشغيل الهواء دون الاعتماد على معدات بدء التشغيل الخارجية.
تصميم القطعة الواحدة يجعل من السهل تعليقه في جميع أنواع الرفوف.
لا داعي لشحن وقت التحضير، ولا يوجد إجراء إشعال معقد، ويمكنه تنفيذ المهام بسرعة.
في بيئة باردة بدرجة حرارة -20 درجة مئوية تحت الصفر، يمكن أن يعمل بثبات.
يمكن للبطارية الاحتياطية توفير الطاقة للعودة الطارئة قصيرة المدى أو الهبوط الاضطراري في حالات الطوارئ.
بالنسبة للأعمال ذات الحمولة الخفيفة، يمكن إضافة خزانات وقود إضافية وزيادة المدى إلى 1.5 إلى 3 ساعات.
تركيب سريع وسهل للمحرك لاستبدال المحرك وصيانته بسرعة وسهولة.
مخطط الصيانة
|
العناصر |
الإجراء |
قبل الاستخدام | كل 25 ساعات | كل 100 ساعات |
ملاحظة |
| التسرب,
تلف/كسر |
تحقق |
✔ |
|||
| سرعة التباطؤ | التحقق/التعديل | ✔ | ✔ | ✔ | |
| منظف الهواء | الفحص/التنظيف | ✔ | ✔ | استبدلها إذا لزم الأمر | |
| شمعة الإشعال (الفجوة) | التحقق/التعديل | ✔ | ✔ | | |
| أسطوانة (برميل) | الفحص/التنظيف | ✔ | ✔ | | |
| المكبس، الحلقة | الفحص/التنظيف | ✔ | ✔ | | |
| بولت | الفحص/التنظيف | ✔ | ✔ | ✔ | |
| المحامل | الفحص/التنظيف | ✔ | ✔ | |















المراجعات
لا توجد مراجعات بعد.