\u0421\u0438\u0441\u0442\u0435\u043c\u0430 \u043f\u0435\u0440\u0435\u0434\u0430\u0447\u0438 HD-\u0432\u0438\u0434\u0435\u043e\u0441\u0438\u0433\u043d\u0430\u043b\u0430 Herelink 2,4 \u0413\u0413\u0446 \u043d\u0430 \u0431\u043e\u043b\u044c\u0448\u0438\u0435 \u0440\u0430\u0441\u0441\u0442\u043e\u044f\u043d\u0438\u044f<\/h1>\n
From Hex and ProfiCNC, the team who brought you Pixhawk and The Cube GPS system, comes an all-in-one solution for long-range HD video transmission. The Herelink\u00a0HD Digital Video Transmission System.<\/p>\n
This 2.4GHz radio controller with built-in screen allows users to get long range HD video, telemetry, and control link up to a whopping 20km. It uses the 2.4GHz band on LTE over WIFI. This allows maximum transmission\u00a0distance. Purported to have a range of 20km in FCC and 12km in CE.<\/p>\n
The large 5.5″ screen displays a multitude of control options such as live images, autopilot configuration through the native QGround control or other GCS applications based on the Mavlink system.<\/p>\n
The Air Unit uses between 5-12v input power and has a single UART for connection to the flight controller or other Mavlink accessories. Both the Air Unit and the Radio Controller are equipped with powerful Pinecone S1 processors with 4 cores at 2.2GHz and 4 more additional cores at 1.4GHz. This allows for tons of possibilities for app usage and future development.<\/p>\n
\u0425\u0430\u0440\u0430\u043a\u0442\u0435\u0440\u0438\u0441\u0442\u0438\u043a\u0438<\/h2>\n\n- All in one: Telemetry, Video, and control<\/li>\n
- Up to 20KM in FCC mode and 12KM in CE mode<\/li>\n
- 2.4Ghz frequency<\/li>\n
- UART Telemetry<\/li>\n
- RC Protocol: SBUS, iBUS, ETC.<\/li>\n
- Mavlink compatible<\/li>\n
- Touch screen<\/li>\n
- HDMI input x2 for 1080P video transmission @ 60fps<\/li>\n
- APP QGround control, and API for development.<\/li>\n
- WIFI, Bluetooth and USB to connect with other devices<\/li>\n<\/ul>\n
![\"\"](\"\/wp-content\/uploads\/2025\/03\/herelink-Detail-Page-en-1-1.jpg\")
<\/p>\n
\u0422\u0435\u0445\u043d\u0438\u0447\u0435\u0441\u043a\u0438\u0435 \u0445\u0430\u0440\u0430\u043a\u0442\u0435\u0440\u0438\u0441\u0442\u0438\u043a\u0438<\/h2>\n
Air Unit and Controller<\/strong><\/p>\n\n- Processor: SoC \u2013 Pinecone S1 AP: 4 x large core, Cortex A53, 2.2GHz 4 x small core, Cortex A53, 1.4GHz GPU: 4 core, Mali-<\/li>\n
- T860 SDR: A7 + DSP Storage: Sky: LPDDR3: 1GB Ground: LPDDR3: 2GB Sky \/ Ground: EMMC: 4GB<\/li>\n
- Transmission Distance: FCC 20km CE \/ SRRC 12km Image transmission delay: \u2264 110ms Image transmission: 720p@30fps 1080p@30 \/ 60fps transmission<\/li>\n
- Frequency Band: 2.4GHz ISM Receive sensitivity: -99dBm@20MHz BW Interference recovery: < 1s<\/li>\n<\/ul>\n
Air Unit<\/strong><\/p>\n\n- Appearance: core board + video daughter board + structure of RF daughter board<\/li>\n
- Among them, the video daughter board completes the input bridge function of theHDMI signal.<\/li>\n
- The RF daughter board completes the function of transmitting and receiving signals<\/li>\n
- M2 (E) connector connection between daughter board and core<\/li>\n
- Size: 78.5x30x13mm<\/li>\n
- Micro HDMI x 2: Input for external camera video signals<\/li>\n
- 2 Pin interface x 1:5V-12V power input interface<\/li>\n
- 3 Pin interface x 1:3.3V \/ 5V level UART interface<\/li>\n
- 4 Pin interface x 1: Two 3.3V level RC output connectors (S.bus in phase, S.bus inverting or PPM signal output, ground terminal control)<\/li>\n
- Micro USB x 1: for debugging upgrades, support OTG mode<\/li>\n
- Keyhole x 1: for frequency and status reset<\/li>\n
- Indicator x 2: used to indicate the frequency and picture status<\/li>\n
- MMCX antenna jack x 2: used for signal transmission and ground communication<\/li>\n
- Signal bandwidth: 20MHz \/ 10MHz<\/li>\n
- Power consumption: the average power consumption of the single-sided module is less than 4W<\/li>\n<\/ul>\n
Controller<\/strong><\/p>\n\n- Housing: plastic<\/li>\n
- Dimensions: 217 \u00d7 106.5 \u00d7 31mm (the whole machine does not contain external antenna and rocker)<\/li>\n
- Screen: 5.46 inch, 1080P, 16 million colors, capacitive touch screen<\/li>\n
- Audio: Built-in speaker \u00d7 1, built-in microphone \u00d7 2<\/li>\n
- Remote control: rocker \u00d7 2, scroll wheel \u00d7 1, bottom button \u00d7 6, with backlight, top button \u00d7 1 (right)<\/li>\n
- Communication : BT \/ WIFI \/ GPS 2.4G map transmission ground<\/li>\n
- Indicator light: Top tri-color lamp \u00d7 2 (left, right)<\/li>\n
- Interface: MicroUSB\u00d71, TFlash\u00d71 (supports maximum 64G expansion)<\/li>\n
- Antenna: Orientation (5dBi) \u00d7 1 detachable, omnidirectional (2dBi) \u00d7 1 detachable<\/li>\n
- Built-in wifi antenna, built-in GPS antenna, external GPS antenna interface<\/li>\n
- Power: Built-in 4950 mAh Lipo Battery<\/li>\n
- Charging: Support micro USB port 5v 2A current charging<\/li>\n
- Power consumption: The average power consumption does not exceed 4W (only picture transmission work, medium screen brightness, WiFi off, GPS off)<\/li>\n<\/ul>\n
Resources<\/h2>\n\n- Manual Link\u00a0<\/strong><\/li>\n<\/ul>\n
https:\/\/docs.cubepilot.org\/user-guides\/herelink\/firmware-releases<\/p>\n
<\/p>\n<\/p>\n
<\/p>\n<\/p>\n
<\/p>\n<\/p>\n<\/div>\n
<\/p>\n
\u0422\u0435\u0445\u043d\u0438\u0447\u0435\u0441\u043a\u0438\u0435 \u0445\u0430\u0440\u0430\u043a\u0442\u0435\u0440\u0438\u0441\u0442\u0438\u043a\u0438<\/h2>\n
Air Unit and Controller<\/strong><\/p>\n Air Unit<\/strong><\/p>\n Controller<\/strong><\/p>\n https:\/\/docs.cubepilot.org\/user-guides\/herelink\/firmware-releases<\/p>\n <\/p>\n<\/p>\n <\/p>\n<\/p>\n <\/p>\n<\/p>\n<\/div>\n\n
\n
\n
Resources<\/h2>\n
\n