Herelink 2.4GHz Langstrecken-HD-Videoübertragungssystem

Herelink 2.4GHz Long Range HD Video Transmission System – Bild 2

Herelink 2.4GHz Long Range HD Video Transmission System – Bild 3

Herelink 2.4GHz Long Range HD Video Transmission System – Bild 4

Herelink 2.4GHz Langstrecken-HD-Videoübertragungssystem

Name: Herelink 2.4GHz Langstrecken-HD-Videoübertragungssystem
SKU: S16058577284305946183302632
Availability: InStock

€899.90

87 vorrätig

Artikelnummer: S16058577284305946183302632 Kategorien: UAV-Zubehör, RC & Bodenstation

Distance is the soul of Beauty

A HD Video Transmission System, using PineSync technology based on S1 processor. lt is an easy-to-use device for sending HDMl video and audio signals, at an affordable pricing.

Smooth signal transmission over long distances

Signal transmission range up to 20KM; With minimum latency 110ms; Two HDMI inputs; Supports 720p 30fps, 1080p 30fps / 60fps video format

Powerful image processing capabilities

Eight-core high-performance processor S1 built-in in the air unit and controller,ensures stronger and faster data computing capabilities. Built-in powerful video image analysis GPU, 4-core Mali-T860.

QGC and Solex app support

The customized Solex and QGC Ground Control Station (GCS) software has perfect MAVlink support for Ardupilot and PX4.You can choose the GCS according to your own needs, making the system flexible to your needs.

OEM support features

Herelink supports the installation of AN OEM image, allowing you to customize your Settings to change, including boot animation changes, system configuration changes,Android application changes, nd Android property changes. Please con tact our sales teanivia your currentre- seller for OEM support.

Over The Air (OTA)updates support

Herelink can update OTA via WIFI connection in the application. Compared with downloading the whole firmware package, OTA upgrade only needs to download part of the update package, which is faster to download, install and upgrade, and greatly improves the efficiency of use.

Multiple Units in One

Integrates data link unit, remote control link and video display unit into a single device. Making the complex device system integrated and miniaturized.

Hardware-Spezifikation
Prozessor	SoC – Pinecone S1
	AP: 4 x large core, Cortex A53, 2.2GHz
	4 x small core, Cortex A53, 1.4GHz
	GPU: 4 core, Mali-T860
	SDR: A7 + DSP
Storage	Air Unit LPDDR3 1GB
Storage	Controller LPDDR3 2GB
Air Unit/Controller	EMMC 4GB
Transmission Range	FCC 20km CE/SRRC 12km
Latency	Min 110ms
Auflösung	720p@30fps, 1080p@30/60fps
Frequency Band	2.4GHz ISM
Receive sensitivity	-99dBm@20MHz BW
Interference recovery	< 1s
Air Unit
Housing	Aluminum
Gewicht	95g (w. antennas)
Dimension	78.5x30x15mm (w/o antennas)
Signal Bandwidth	20MHz/10MHz
Power Consumption	< 4W
HDMI 1	Micro HDMI, for video input (preferred)
HDMI 2	Micro HDMI, for video input
Strom	Recommended supply voltage ~7V, minimum 6V, maximum 12V and avoid sharing BEC with servos
Micro USB	For debug or upgrade, support OTG
Pair/Reset	For pairing and reset
LED 1, 2	To indicate pairing status and transmission status
UART	3.3V / 5V UART
S.bus	Two 3.3V RC output
ANT 1, 2	MMCX, for signal transmission and communication
Controller
Housing	Plastic
Gewicht	516g (w. antennas)
Dimension	217×106.5x31mm (w/o antennas, joysticks )
Screen	5.46 inch, 1080P, 16 million colors,
Screen	capacitive touch screen
Audio	1 x built-in speaker, 2 x built-in microphone
Remote control	2 x joystick, 1 x wheel,
Remote control	6 x button (w. blacklight), 1 x upper right button
Communication	WIFI/GPS 2.4GHz on the controller side
LED	2 x tricolor LED (left, right)
Schnittstelle	1 x MicroUSB, 1 x Micro SD card slot
Schnittstelle	(extendable to max. 64GB)
Antenne	1 x detachable directional (5dBi),
	1 x detachable omni-directional (2dBi),
	built-in WIFI antenna, built-in GPS antenna,
	external GPS antenna interface
Strom	4950mAh built-in Lipo Battery
Charging	Support micro USB 5V 2A charging
Power consumption	< 4W average (With transmission on, medium screen brightness, WIFI off, GPS off)